Infrared Thermometer

Instructions for non-contact infrared thermometer

 

(this manual is owned by our company and is for referenceonly. If you have any questions, please consult the customer service.)

 

 

 

Non-contact infrared thermometer can rapidly and accuratelymeasure the body temperature, compared with the traditional mercury glass rod,is easy to count, with short time and high measuring accuracy, can memory andhas the advantages of buzzer hint, especially is a non-contact infraredthermometer with no mercury, harmless to the human body and the surroundingenvironment, especially suitable for family use.

 

 

 

Technical parameters:

 

Operating environment :(10-35) ℃, ≤80%RH

 

Measuring range: 32.00℃-44℃

 

(when the temperature is out of this range, it shows Lo orHi)

 

Measurement error: ±0.3℃ (32℃-44℃)

 

Resolution: 0.1℃

 

Power consumption: 0.15mw in working condition

 

Battery: 2* 1.5v no. 7 alkaline battery

 

Battery life: 100 hours of continuous operation

 

Overall size: 134×23×15mm (with transparent shell)

 

Net weight: approx. 80g

 

Buzz tip: temperature tip

 

Storage condition: after packaging, storage environment (-25~ 55) ℃, ≤95%RH,no corrosive gas and well ventilated room.

 

Physiological effect: this product in the use of theprocess, non-toxic to the human body, no stimulation, no sensitization andother adverse reactions.

 

 

 

Usage of non-contact infrared thermometer:

 

1. Gently press the big white button at the bottom of thescreen to display the screen, and then quickly display the preset temperaturevalue, which is starting at this time.

 

2, to be displayed on the screen --, indicating that thebody temperature has been in the state to be measured.

 

3. The body temperature is measured by the non-contactinfrared thermometer. When the temperature is higher than the alarm settingtemperature, the non-contact infrared thermometer will beep for about 2seconds. Because before the measurement, the factors such as forehead, palmsmay result in measurement process, the part being measured temperature is stillrising, and the measurement process, the change of the position of thenon-contact infrared thermometer, could lead to a buzzer when the temperaturedisplay and the actual temperature of human body torso still have differences,so proposal after the buzzer, measure 3 times continuously, to ensure that thecloser to the human body temperature, especially when underarm measurementmethod is adopted.

 

4. The non-contact infrared thermometer has the function ofautomatic shutdown, which will be automatically shut down within 30 secondsafter the measurement.

 

 

 

Please note: due to the relatively high precisionnon-contact infrared thermometer, might differ slightly at the same time closedtemperature (because of the human body temperature is changing, mood is tense,physical activity, frightened, measuring way or parts will be some impact), thedifference of 0.2 ℃ or so is normal phenomenon, thepositive reaction of non-contact infrared thermometer and high precision,please be assured that use.

 

 

 

Memory function

 

When starting up, the screen first displays the initialscreen, and the last temperature in memory is displayed at the bottom of thescreen (the recording function only shows the last temperature measured. Ifthere is no temperature measured, the temperature will not be recorded whenstarting up again.)

 

 

 

Notes:

 

Do not beat and bend the non-contact infrared thermometer;

 

Do not allow direct sunlight non-contact infraredthermometer;

 

Do not remove the non-contact infrared thermometer except toreplace the battery;

 

 

 

Battery information:

 

The contactless infrared thermometer requires users topurchase and install 2 1.5v no. 7 alkaline batteries. Under normal use, thebattery life in the shell is about 6 months. General electronic repair shop hasthis battery sales, you can buy replacement.